Fender
05/05/16, 01:32:20
Pues eso. Vendo Pilotfly H1+. Para mi el mejor gimbal electronico de su categoría, y diría que por su fiabilidad y dimensiones, mejor que muchos de categorias mas grandes. No lo digo yo, lo dice muchisima gente y reviews.Se compro para un proyecto , en el cual finalmente no fue necesario usar ( pero eso lo cuento en otro post).
Esta nuevo, se compro hace 5 meses , y solo se sacó para probarlo un dia.
Viene su maleta y con el kit de minitripode de soporte, y una bateria extra de mayor capacidad.
Estas fotos no son del mio, pero como si lo fuera, está exactamente igual. Para los que busqueis un estabilizador de mano comodo y fiable, o los que aún esteis con estabilizadores tipo Glidecam HD2000,etc , este es vuestro "santo grial".
Lo vendo pq necesito hacer caja para una lente, si no no lo vendia. Nuevo costo 910€, se vende por 700€ + envio ( unos 20€ por MRW).
Interesados mandad privado.No me interesan cambios.
http://photoperformance.photos/wp-content/uploads/2015/09/20150828_154123-cropped.jpg
http://copter-rc.com/183-thickbox_default/pilotfly-h1.jpg
https://www.youtube.com/watch?v=tywXMA7ciZ8
PILOTFLY H1+ is a handheld stabilizer for cameras with a weight up to 1,2kg.
The Pilotfly-H1+ handheld stabilization gimbal with the most advanced technology gives you an immersive experience for your photo and video shooting. The 32bit technology and the 2 IMU sensors offer you a more powerful shooting experience than ever before.
The ergonomic handle manufactured of engineering plastic has a built-in battery, equipped with an easy-to-use mode button and rock switch. The 3-axes of the gimbal consist of a CNC aluminium alloy construction which provides a massive, stable and reliable video experience. Our own developed brushless motors can support a payload up to 1200 gram which offers a high flexibility of the camera & lens configuration for the user. The Pilotfly-H1+ is a master piece of engineering which combines an elegant design with high versatility and mobility. It's the beginning of a new era of video shooting experience.
Features:
Aluminium CNC alloy construction
Own developed brushless motor (Type 4108) with high payload
Elegant design and easy to adjust the center of gravity.
All three axes (Pitch, Roll and Yaw) can be perfectly adjusted in about 5 minutes.
Built-in Li-Po battery with a capacity of 1800mAh
External battery can be easily plugged in to extend the video shooting time
High versatility by supporting a variety of cameras.
32bit gimbal control system
Extremly high accuracy and stability due to two integrated IMU sensors
Temperature calibration supported to ensure high reliability under different working conditions
Support of 5 default modes – Follow mode, Pitch-lock mode, Head-lock, Follow Roll and Invert mode (auto detection)
Support of 5 free configurable user modes selected via the “Mode” button
Pitch and Roll angel can be controlled by the rock switch
Adaptive PID-algorithm to prevent vibrations
Low Voltage Directive to protect the battery
Sound alert for low voltage, mode change and calibration sequence
Wireless remote via Bluetooth (Android OS)
System configuration and Firmware upgrade via different platforms (Windows, MAC OS, Linux) possible
Technical data:
- 32bit Alexmos 3 axis Gimbal
- 2 IMU sensor
- Weight approx. 890g
- Dimension 310 x 150 x 150mm
- Max. Motor payload approx. 1.2kg
- Integrated Lithium Polymer battery 11.1V / 1800mAh
- Battery lifetime approx. 1-2,5h depending on camera weight
Esta nuevo, se compro hace 5 meses , y solo se sacó para probarlo un dia.
Viene su maleta y con el kit de minitripode de soporte, y una bateria extra de mayor capacidad.
Estas fotos no son del mio, pero como si lo fuera, está exactamente igual. Para los que busqueis un estabilizador de mano comodo y fiable, o los que aún esteis con estabilizadores tipo Glidecam HD2000,etc , este es vuestro "santo grial".
Lo vendo pq necesito hacer caja para una lente, si no no lo vendia. Nuevo costo 910€, se vende por 700€ + envio ( unos 20€ por MRW).
Interesados mandad privado.No me interesan cambios.
http://photoperformance.photos/wp-content/uploads/2015/09/20150828_154123-cropped.jpg
http://copter-rc.com/183-thickbox_default/pilotfly-h1.jpg
https://www.youtube.com/watch?v=tywXMA7ciZ8
PILOTFLY H1+ is a handheld stabilizer for cameras with a weight up to 1,2kg.
The Pilotfly-H1+ handheld stabilization gimbal with the most advanced technology gives you an immersive experience for your photo and video shooting. The 32bit technology and the 2 IMU sensors offer you a more powerful shooting experience than ever before.
The ergonomic handle manufactured of engineering plastic has a built-in battery, equipped with an easy-to-use mode button and rock switch. The 3-axes of the gimbal consist of a CNC aluminium alloy construction which provides a massive, stable and reliable video experience. Our own developed brushless motors can support a payload up to 1200 gram which offers a high flexibility of the camera & lens configuration for the user. The Pilotfly-H1+ is a master piece of engineering which combines an elegant design with high versatility and mobility. It's the beginning of a new era of video shooting experience.
Features:
Aluminium CNC alloy construction
Own developed brushless motor (Type 4108) with high payload
Elegant design and easy to adjust the center of gravity.
All three axes (Pitch, Roll and Yaw) can be perfectly adjusted in about 5 minutes.
Built-in Li-Po battery with a capacity of 1800mAh
External battery can be easily plugged in to extend the video shooting time
High versatility by supporting a variety of cameras.
32bit gimbal control system
Extremly high accuracy and stability due to two integrated IMU sensors
Temperature calibration supported to ensure high reliability under different working conditions
Support of 5 default modes – Follow mode, Pitch-lock mode, Head-lock, Follow Roll and Invert mode (auto detection)
Support of 5 free configurable user modes selected via the “Mode” button
Pitch and Roll angel can be controlled by the rock switch
Adaptive PID-algorithm to prevent vibrations
Low Voltage Directive to protect the battery
Sound alert for low voltage, mode change and calibration sequence
Wireless remote via Bluetooth (Android OS)
System configuration and Firmware upgrade via different platforms (Windows, MAC OS, Linux) possible
Technical data:
- 32bit Alexmos 3 axis Gimbal
- 2 IMU sensor
- Weight approx. 890g
- Dimension 310 x 150 x 150mm
- Max. Motor payload approx. 1.2kg
- Integrated Lithium Polymer battery 11.1V / 1800mAh
- Battery lifetime approx. 1-2,5h depending on camera weight