Tema: Canon publica nuevo firmware para la 1Ds Mark III

This firmware update (Version 1.1.4) incorporates the following fixes.

1. Corrects a phenomenon in which a displayed image becomes pitch-black if it is zoomed in on during Live View shooting.
2. Corrects a phenomenon in which "busy" may continue to appear on the camera if the USB cable is disconnected during USB communication.
3. Changes the error indications that are displayed on the camera. The error indications are further clarified to make the causes of errors easier to identify, and so that adequate support can be provided to our customers.

Saludiños

Nueva nomenclatura para los errores

Indications on the Camera's LCD monitor (XX are numbers listed on the right.)

Err XX :Shooting is not possible. Turn the power switch to <OFF> and <ON> again or re-install the battery.

No...............................Error details

10 ...... Malfunctions related to files have been detected.(*1)
20 ...... Malfunctions related to the mechanical have been detected.
30 ...... Malfunctions related to the shutter have been detected.
40 ...... Malfunctions related to the power source have been detected.
50 ...... Malfunctions related to the electric control have been detected.
70 ...... Malfunctions related to images have been detected.
80 ...... Malfunctions related to the electric control or images have been detected.
99 ...... Malfunctions related to the mechanical charge mechanism have been detected.

• *1: Err 10 is only displayed on the EOS-1Ds Mark III and other error numbers are shared.
  • If malfunctions in the camera are detected, "Err XX" will be displayed. A two-digit number that corresponds to the malfunctions detected by the camera will be displayed in the "XX" section of the error number. Other than the error numbers listed above, there are other numbers such as "01". In that case, provide appropriate handling and servicing by following the details displayed on the LCD monitor of the camera.
  • If an error code appears frequently, the camera is malfunctioning; therefore, note down the error number and contact our service center.
  • The changes in the display of error indications only apply to the EOS-1D Mark III and EOS-1Ds Mark III. The above error numbers and details do not apply to models other than the specified models.
  
  

Gracias

Gracias por el aviso de esta actualización

Un saludo

Muchas gracias,un cordial saludo

Gracias por el aviso. Actualizada sin problemas, mañana la probaré... Da gusto con estos moderadores... (boing boing boing)