Guide number: |
54 meters (ISO 100, 105mm) |
Circuit design: |
Insulated Gate Bipolar Transistor (IGBT) |
Flash mode: |
TTL / M / RPT (repeating) / MA (semi-automatic) |
Zoom range: |
18mm, 24mm, 28mm, 35mm, 50mm, 70mm, 85mm, 105mm, 135mm, 180mm |
Vertical rotation angle: |
0 to 90 degrees |
Horizontal rotation angle: |
0 to 3600 degrees |
Power: |
4X AA Batteries (Alkaline or Ni-MH are usable) |
Flash control: |
8 grade high-speed control(1/128-1/1) |
Recycle time: |
approximately 3s (AA alkaline cell used) |
Lighting time: |
100-1500 times (using AA alkaline cell) |
Color temperature: |
5,500K |
Flash time: |
1/200s~1/20000s |
Wireless triggering distance: |
20-30m indoor
10-15m outdoor |
Additional function: |
PC synchronous, sniff mode, overtemperature protection |
Dimensions: |
200 x 75 x 57mm (extended state) |
Net Weight: |
340g |
New Arrival Flash Speedlite, it's designed for Canon DSLR Camera.
Wireless trigger sensors: Remote sensing CELL 2 mode for off-camera TTL flash sync. Increase the external power outlet: TR series adds an external power outlet, call back the higher rate to meet your needs.
Quick call back: full output only 2.9 seconds recycle time, do not apply the new battery can also call back to obtain a rapid rate, only 4-5 seconds.
Support high-speed continuous shooting: 1/16 and below the brightness,TR series to support high-speed continuous shooting 12EPS.
Power-saving mode: When the flash without any action on the backlight turned off after 20 seconds, 60 seconds when the flash does not work, CPU automatically goes to sleep does not work ore than 30 minutes, CPU will automatically shut down.
High-precision output: from 1/128 to 1/1, 8 stalls to lose, each stall has two fine-tuning compensation.
Overheat protection: built-temperature detection(thermal protection)
Support second-curtain sync: use a slow shutter for making smear subject, the flash will be off the moment the shutter flash spill, this is the rear-curtain sync function.
Pixco PG-708 TTL Flash Speedlite for Canon EOS
Ó
Meike E-TTL Flash Speedlite - MK-951 for Canon EOS
Circuit design: Insulated Gate Bipolar Transistor (IGBT)
Guide Number: 53 (ISO 100, 105mm)
Flash Mode: TTL,M,Multi
Wireless trigger: Canon/Nikon wireless system/S1/S2 pre-flash-canceled mode
Wireless triggering distance: 20-25m indoor,10-15m outdoor
Zoom range: 24,28,35,50,70,80,105mm
Vertical rotation angle: 0~90 degree
Horizontal rotation angle: 0~270 degree
Power: 4 X AA size batteries (Alkaline or Ni-MH are usable)
Lighting times: 100 - 1500 times (with alkaline batteries)
Recycle Time: approx 3s ( AA alkaline cell used)
Color Temperature: 5600K
Flash Duration: 1/200S - 1/20000S
Flash Control: 22 levels of output control (1/128s - 1s)
External Interface: hot shoe, PC port and eternal charing port
External Power pack: MK-SD8A battery pack
Additional Features: Modeling flash, manual zoom, auto zoom, PC port
Dimensions: 60 x 190 x 78mm
Net Weight: 350g
TTL flash with large guide number: GN53 ISO 100,105mm;which reaches the level of the mainstream hot shoe flashes,supports TTL/M/Multi mode.
Multiple and fiexible sync trigger mode: the MK951 can be triggered by hot-shoe, flash command slave mode, optical S1,and S2 (pre-flash-canceled mode).
Supports auto/manual zooming: the MK951 covers a focal length range of auto,and 24 to 105mm, supports full-frame/half-frame camera.
Supports TTL functions: exposure compensation.
Super speed of charging recycle: it only takes 3 seconds to finish a charging cycle after a full level output,you can use external power pack to accelerate the charging speed once more.
Provides charging socket for external power pack: MK951 provides charging socket for external power pack,power recycle extra fast.
PC port provided: MK951 provides pc port,you can more convinient to use the pc cable to sync flash.
LCD panel user interface, look easy and decent.
Marcadores