Nomenclatura de Código de Errores

[Sergio16]

Hace ya dos días que tengo en mi poder y he tuve el primer error, ERROR 01, y despues de buscar en la eb de Canon me he encontrado con el significado del código de error, por suerte era nada, pero para a alguien le pueda servir de ayuda os dejo el listado de codigo, significado del mensaje, y suoluciones.
List of Error Messages & Solutions


Error code No.MessageSolutionErr 01Communications between the camera and lens is faulty. Clean the lens contacts.-Clean the electrical contacts on the camera and lens.
-Use a Canon lens.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center. (*1)Err 02Card cannot be accessed. Reinsert/change card or format card with camera.-Remove and install the card again.
-Replace the card.
-Format the card. (*2)Err 04Cannot save images because card is full. Replace card.-Replace the card.
-Erase unnecessary images on the card.
-Format the card. (*2)Err 05The built-in flash could not be raised. Turn the camera off and on again.-Turn the power switch to < ON > to turn on the power again.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center. (*1)Err 06Sensor cleaning is not possible. Turn the camera off and on again.-Turn the power switch to < ON > to turn on the power again.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center. (*1)Err 10,20,30,40,
50,70,80Shooting is not possible due to an error. Turn the camera off and on again.-Turn the power switch to < ON > to turn on the power again.
-Remove and re-install the battery.
-Use a Canon lens.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center. (*1)

*1 Please refer the IMPORTANT below.
*2 Please refer the CAUTION below.
*3 Details of the error codes are as follows.



Error CodeError DetailsErr 10Malfunctions related to files have been detected.Err 20Malfunctions related to the mechanical mechanism have been detected.Err 30Malfunctions related to the shutter have been detected.Err 40Malfunctions related to the power source have been detected.Err 50Malfunctions related to the electric control have been detected.Err 70Malfunctions related to images have been detected.Err 80Malfunctions related to the electric control or images have been detected.



Un saludo

[Sergio16]

Hace ya dos días que tengo en mi poder y he tuve el primer error, ERROR 01, y despues de buscar en la eb de Canon me he encontrado con el significado del código de error, por suerte era nada, pero para a alguien le pueda servir de ayuda os dejo el listado de codigo, significado del mensaje, y suoluciones.
List of Error Messages & Solutions


Error code No.MessageSolutionErr 01Communications between the camera and lens is faulty. Clean the lens contacts.-Clean the electrical contacts on the camera and lens.
-Use a Canon lens.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center. (*1)Err 02Card cannot be accessed. Reinsert/change card or format card with camera.-Remove and install the card again.
-Replace the card.
-Format the card. (*2)Err 04Cannot save images because card is full. Replace card.-Replace the card.
-Erase unnecessary images on the card.
-Format the card. (*2)Err 05The built-in flash could not be raised. Turn the camera off and on again.-Turn the power switch to < ON > to turn on the power again.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center. (*1)Err 06Sensor cleaning is not possible. Turn the camera off and on again.-Turn the power switch to < ON > to turn on the power again.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center. (*1)Err 10,20,30,40,
50,70,80Shooting is not possible due to an error. Turn the camera off and on again.-Turn the power switch to < ON > to turn on the power again.
-Remove and re-install the battery.
-Use a Canon lens.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center. (*1)

*1 Please refer the IMPORTANT below.
*2 Please refer the CAUTION below.
*3 Details of the error codes are as follows.



Error CodeError DetailsErr 10Malfunctions related to files have been detected.Err 20Malfunctions related to the mechanical mechanism have been detected.Err 30Malfunctions related to the shutter have been detected.Err 40Malfunctions related to the power source have been detected.Err 50Malfunctions related to the electric control have been detected.Err 70Malfunctions related to images have been detected.Err 80Malfunctions related to the electric control or images have been detected.



Un saludo

Lo siento se ha desconfigurado, os dejo el link donde encontrreis la información EOS 7D

[Juan55]

Lo muevo al General de Cámaras.

Saludiños